[product name] high intensity UV light curing lamp
[product model] JYU
JYU metal head / JYU ceramic head
UV curing lamp [product category]
UV light curing, 365nm UV, and UVB
High strength gas discharge lamp
[product characteristics]
1. high strength gas discharge lamp, strong UV output, fast curing speed;
2. made of imported quartz glass tubes, the ultraviolet transmittance is very strong.
3., high magnetic leakage induction transformer is added to start up. The spectral energy distribution is centered at 365nm, and its effective range is 350nm-450nm. It has high power density and effective ultraviolet band.
4. strong ultraviolet high pressure mercury lamp radiation, instantaneous surface curing;
5. instantaneous curing, saving time and electricity, saving space and pollution-free, etc.
6. the lamp head is divided into two kinds of metal and ceramic, of which the ceramic lamp head adopts the high temperature resistance wire as the wire to guarantee the use effect.
[application area] UV paint drying, surface curing, printing plate making, ink drying, UV curing, polymer aging, semiconductor manufacturing and other fields of photochemistry.
[comprehensive introduction]
High intensity ultraviolet light curing lamp, called UV lamp, is a high strength gas discharge lamp. It is made of imported quartz glass tube with very strong ultraviolet transmittance. The high leakage magnetic induction transformer is added to start up. The spectral energy distribution is centered at 365nm, and its effective range is 350nm-450nm. It has high power density and effective ultraviolet band. High pressure ultraviolet mercury lamp radiation, instant surface curing, is a rapid development of a new technology in recent years. High intensity UV curable lamp has the characteristics of instant curing, saving time and electricity, saving space and no pollution. It is especially suitable for printing, plate making, printing ink drying, light curing, polymer aging, semiconductor manufacturing and other fields. The high intensity ultraviolet light curing lamp lamp head is divided into two kinds of metal and ceramic, of which the ceramic lamp head uses the high temperature resistance wire as the wire to guarantee the use effect.
[instructions]
1. the lamp should be used by the corresponding ballast, trigger or magnetic flux leakage transformer.
2. before installation needs to use gauze to dip the ether to wipe the surface of the lamp, so as to avoid the premature loss of the lamp.
3. the lamp has ultraviolet radiation, and the operator must wear sunglasses to avoid burning the eyeball.
The 4. giant source optoelectronic also carries on the production of the imported equipment UV light source and the non standard light source.
[product photo]
[video data]
[specification parameter]