【产品名称】快速启动晒版碘镓灯

【产品型号】JYP

【关键字】强紫外光源,近紫外光源 ,印刷晒版灯,电路版晒版灯,

【产品类别】UV固化灯

【技术原理】金属卤化物放电灯

【产品特点】

1.超强320-450nM强紫外和近紫外光源,辐射强；

2.品质保障，光谱稳定、照度均匀；

3.灯管寿命长、晒版时间短；

【应用范围】印刷晒版、印刷平印、凸印、PS版晒版、标牌和印刷电路版晒版

【综合介绍】

碘镓灯是产生强烈的320-450nM紫外和近紫外光的金属卤化物放电灯，专为光化学工艺而设计制造的强紫外和近紫外光源，适用于印刷平印、凸印、PS版晒版用，标牌和印刷电路版晒版用，该系列灯工作时光谱稳定、照度均匀、寿命长、晒版时间短等优点。

【使用说明】

1．切勿用手接触灯管，灯管上沾染上手渍、油污、灰尘会使石英管失透，影响光输出。如果灯管已污染，可用无水酒精润湿棉球擦净。

2．灯必须与相应型号的电源设备（包括触发电路、镇流器、脉冲灯还包括脉冲电路）匹配使用。

3．灯应牢固安装在具有一定风冷条件的灯具中工作，灯头和引线的电接触应良好，否则可能因大电流产生焦耳热而缩短灯泡寿命。

4．灯使用时电源电压变化不应超过±10%。

5．灯点燃后会产生一定的紫外线辐射，切勿直视和近晒，以免灼伤眼球和皮肤。

【产品照片】

【视频资料】

【规格参数】

Fast start sun plate iodic gallium lamp
[product model] JYP
[key] strong ultraviolet light source, near ultraviolet light source, printing plate lamp, circuit plate lamp,
UV curing lamp [product category]
Metal halide discharge lamp
[product characteristics]
1. ultra strong 320-450nM strong ultraviolet and near ultraviolet light source, the radiation is strong.
2. quality guarantee, the spectrum is stable, the illumination is uniform.
3. lamp life is long and the time of sun - sun is short.
(application range) printing and sun printing, printing flat print, convex, PS edition, sign and printed circuit Edition
[comprehensive introduction]
Iodine gallium lamp is 320-450nM strong ultraviolet and near ultraviolet light metal halide discharge lamp, light source for the photochemical process and the design and manufacture of strong ultraviolet and near ultraviolet, suitable for flat printing, embossing, PS print, signage and printed circuit board for printing, the advantage of the series lamp work time spectral stability, uniform illumination, long service life, short exposure time etc..
[instructions]
1. do not use hand contact light pipe, light tube stained with hand stains, oil pollution, dust will cause the loss of quartz tube, affect the output of light. If the lamp has been polluted, the cotton ball can be wetted with anhydrous alcohol.
The 2. lamp must be used with the corresponding type of power supply, including the trigger circuit, the ballast, the pulse lamp and the pulse circuit.
The 3. lamp should be firmly installed in the luminaire with certain air cooling conditions. The electrical contact between the lamp holder and the lead wire should be good, otherwise the Joule heat will be generated due to the high current and shorten the life of the bulb.
The change of the power supply voltage should not exceed + 10% when the 4. lamp is used.
5. lights will produce a certain amount of ultraviolet radiation, do not look directly and close to the sun, so as not to burn the eyeball and skin.
[product photo]
[video data]
[specification parameter]